Product Details:

White plunger lubricant shot beads do not contain graphite, are high-temperature resistant have good lubricity, and are widely used in hot chamber and cold chamber die casting machines. 

The granule size of the product is 0.5-1.0mm,1.0-1.5mm,1.5-2.0 mm,2.0-2.5 mm, and 2.5-3.0 mm, it can be in the shot sleeve and injection on melting and rapid expansion in the shot sleeve and on plunger tips.

 Its superior capillary effect in the shot sleeve to form an excellent lubricating film, is more convenient usage and different from traditional usage of oil-based and water-based plunger lubricant oil which are used in plunger pump spray systems.

Product advantages:

1. There is no general oily lubricant pollution.

2. To reduce the rate of blow holes.

3. Prolong service's life of die casting with a punch, generally tripled than normal lubrication.

4. No oil scar on the surface of the die casting, the surface is clean and bright.

5. Increase injection speed.

6. When sprue gate, flow channel, soup cake recycle use, without oily be soiled, smoke-free,no pollution.

7. Don't have to waste water, without a water cooling system, and clean the injection head.